SPECO VL-62 Color Waterproof Camera with Built-in IR LEDs
Rate This Product :
Weather-Proof Color Day/Night Camera with Built-In IR LEDs - Black housing
- 0.25-inch color CCD image sensor
- Plastic housing is waterproof for outdoor applications
- Sensitivity of 1 lux in color to infinity, 0 lux in B/W via IR LEDs to 30-feet
- Camera features built-in CDS sensor that automatically activates IR LEDs at night
- High resolution picture of 420 TV lines with automatic gain control and back-light compensation
The SPECO VL-62 Color Waterproof Camera with Built-in IR LEDs is great for any application in which extremely low-light conditions may at times prevail. This camera comes with 10 IR (infrared) LEDs (light-emitting diode) built in, and automatically switches from color to B/W (black-and-white) for nighttime viewing. Designed to be weatherproof and to provide a high-resolution picture even in the lowest-light conditions, the SPECO VL-62 is a great addition to any video surveillance system, especially in round-the-clock applications subject to inclement weather conditions.
Securely set into a plastic waterproof housing, the VL-62 bullet camera utilizes a 0.25-inch color CCD (charge-coupled device) image sensor with a four-millimeter board lens, and achieves a high resolution of 420 horizontal TVL (TV lines) with 510 x 492 effective pixels. Already very sensitive to light with a minimum illumination of one Lux in color to infinity, this camera's 10 IR LEDs operate at a 850 NM (nanometer) wavelength and allow it to receive a picture in total darkness (0 Lux) in B/W up to 30 feet away. The SPECO VL-62 includes a CDS sensor that automatically turns on the IR LEDs when it gets dark, and runs on a regulated 12-volt DC power supply. The VL-62 comes complete with automatic gain control and backlight compensation, and a built-in automatic electronic shutter with speeds ranging from 1/60 to 1/100,000 of a second.
Technical Features:
- Minimum illumination: 1 Lux in color to infinity; 0 Lux in B/W via IR LEDs to 30-feet
- Lens: 4mm board
- Horizontal resolution: 420 TVL
- IR LEDs: 10 at 850 NM
- Dimensions: 2 x 3 inches (diameter x depth)
The SPECO VL-62 camera provides you with a high-quality color picture from a camera that can go virtually anywhere, and deserves serious consideration as an addition to any severe-weather or discreet security system. The VL-62 comes completely assembled and ready to use, and includes cable routing through the mount as an added protection against vandalism. Users should note that the CCD sensor may become permanently damaged if exposed to long hours of direct sunlight or halogen light, so the camera should not be mounted or pointed directly at the sun or other bright-light sources.
About Surveillance Camera Technical Features
Lux rating is the measurement used to indicate how sensitive a camera is to light, and stands for the level of light reflected off a piece of paper by a candle from one meter away. Thus a sensitivity of three Lux would mean a camera could generate an acceptable picture of a piece-of-paper-sized object that was illuminated by the equivalent of three candles from one meter away. The lower the Lux level, the better the camera's ability to work in low-light conditions. The camera's resolution should be greater than or equal to the resolution supported by the system's recorder or monitor. The S/N, or signal to noise ratio, is an important measure of a camera's quality. A poor camera, low-light conditions or poor wiring causes "noise" which consumes processing power and disk space. A camera with a wide dynamic range is ideal, especially for recording areas in which both indoor and outdoor light are present. CCD (charge-coupled device) sensors provide high-quality images that are less susceptible to noise. CMOS (complimentary metal-oxide semiconductor) sensors offer less image quality, but are usually more cost-effective and energy efficient.
*** Product Information and Prices Stored: Oct 26, 2011 04:24:14 ***
cube light tent can13 ice maker ice cream maker gelato
